Building the Chaparrals

htchap-01

Building the Chaparrals in 1/24 Scale
by Henry Trent

This collection includes Chaparrals 2A through 2H. 2G and 2J are on the way.

htchap-02

Chaparral 2A, Sebring 1965 

htchap-03

This model began as a Cox slot car body. I added a Modelers interior and wheels and opened up the body for the exhausts, which are made from aluminum tubing. Decals are from Patto’s Place. 

htchap-05

Chaparral 2C, Nassau 1965

htchap-04

The 2C body is from the LS kit. I opened the body panels and added mesh screens. 

htchap-06

Chaparral 2D, Daytona 1966

htchap-07

 

Based on the Monogram kit, the early 2D also has wheels and tires from the Fisher kit. The intake stacks are from the Revell parts pack.

htchap-08 

Chaparral 2D, Nurburgring 1966

htchap-09

 

This late version 2D is from the Modelers kit, built out of the box.

htchap-10 

Chaparral 2E, Laguna Seca 1966

htchap-11

 

2E – This is the Fisher kit – build out of the box.

htchap-12 

Chaparral 2F, Le Mans 1967

htchap-13

2F – This is the Fisher kit – build out of the box.

htchap-14

Chaparral 2H, 1969

htchap-15 

2H – From the kit by Mini-Exotics. 

Four Porsche 908s

 dk908s-allfour

Four Porsche 908s in 1/12 Scale
by Dale W. King

908-frt 2-w

Porsche 908/2 (1969)
This one was based on a very crude kit out of Mexico that I had Motoi Shiozawa/Hapico get for me. I basically saved the body, which I heavily modified, and tossed the rest of the kit away (this was my intention before I even got the ‘kit’).

3_4 lft prm w

You can see by the photo just a few of the mods made to the body.

3-4-rr-chass-w

Scratch built pieces include : chassis/frame (the frame is done in brass), just about everything in the cockpit, the entire engine/trans, rear view mirror, rims, tires, tail & head lights, front head light covers and on and on. 

908-top 2-w

The windshield was made by pulling clear sheet vinyl over a polished buck I had made. The body paint is Tamiya gloss white (TS26) and pink (TS25). It was rubbed out with Tamiya polish. 

908-rr 2-w

Even though I dumped the majority of the kit, I did use some of the kit decals. The scratch built wheels and brakes are held in place with the custom center lock nuts.

pre decal frt

Porsche 908/2 LH (1970)
The 908/2 LH is 100% scratch built from my own plans.

908_2-LH-plans-w

The basic body was built up of individual pieces of Renshape cut out on my bandsaw, glued together and shaped.

rough-cut-1 rough-cut-2

The tail lights are created out of Lucite, shaped, backed up with BareMetal and then painted with Tamiya clear red and orange.

final-lites tear-mold-castings mirror rough

For head light covers I created patterns and pulled heated clear plastic over them. The rear brake air scoops were done the same way. The fuel injection ‘hats’ and tear drop shapes located on the rear deck were cast in resin from my own patterns. The rims are also castings from my own originals. The tires were individually turned on the lathe and the center lock nuts actually hold the wheels on. The disc brakes are made up from my own castings. I did artwork for the original p/e magnesium patterns and then made RTV molds. Things like the gas caps and head lights (both bezels and lenses) were turned in aluminum on a lathe. All the colors on the body were done using Tamiya spray paint ( pure white (TS26), bright red (TS49), chrome yellow (TS47) and racing green (TS43). Masking was done with Tamiya tape.

no decals rr

I still have to complete the artwork for the decals and have them printed up on an Alps.

908-3a-2w

Porsche 908/3 (1971)
This model, which is also totally scratch built from my own plans, was completed nearly 40 years ago. The body was carved in balsa wood then fiberglassed using 3/4 oz. model airplane cloth. Afterward most of the underlying balsa was removed creating a hollow shell. This is the one and only time I used this method.

908-3b-2w

The frame was done in brass tubing. The roll bar and rear support bars were plated in nickel and then clear coated.

908-3c-2w

The engine/engine bay was scratch built using Lucite, resin castings, styrene, brass, copper and aluminum. The rims, tires and many other components were cast up from molds I made from my original patterns. The body was painted using Ditzler automotive lacquer – I really miss that product…. it was outlawed many years ago here in California.

908-3d-2w

The multi colored area that runs across the nose and up the front fenders and the black roundels with white number were hand painted. The lettering elsewhere was done with press type. Very “old school”…. pre computers. I was very fortunate to have full access to a real 908. I spent many hours photographing and measuring it.

3-4-frt-2w

Porsche 908/4 (1979/80)
This started out as a rare styrene R/C body by Tamiya. The basic body was there but everything else had to be scratch built: chassis/interior, dash, seats, steering wheel, rims, tires, brakes, rear frame, turbos (these are resin copies made using Tamiya parts as masters), mirrors, etc.

3-4-rear-2w

The paint was Ditzler white lacquer that was rubbed out with Semi Chrome polish. The decals were printed up by Derek Collins in his high school print shop in the early to mid 1980s. I wanted to do another version of this car but, even when I built this many years ago, I was unable to find another body.

side-2w

The real car body was a strange combination of a 908/3 nose, 936 cockpit surround/engine hump/air scoop and 917/10 rear fins and wing. Instead of the 908 fuel injected flat 8 engine it had a flat 6 twin turbo.

rear-close-2w

When finished I photograph my models out doors in open shade on one of several 12th scale ‘sets’. I wanted to do a fifth 908 – a short tail coupe and thought I could base it on the Tamiya 910 but it turns out the bodies are just enough different that it wouldn’t work. Too bad . . . it would have been a nice addition.

Porsche 917 Le Mans 1970

  ds917salzburg-02   

Porsche 917 Le Mans 1970 “Salzburg”
by David Sorensen

This was one of the resin kits from Mexico, and it was real crap.  It required lots of work to create a decent model. I only built it because I picked it up cheap, and I wanted a partner for my Gulf 917.

ds917salzburg-04

ds917salzburg-06

 

I had to scratch-build the frame from plastic tubing.

ds917salzburg-03

Now that it’s finished, it does look good on the shelf next to the Gulf 917:  

ds917salzburg-05

And next to a 1/24 Salzburg 917:

ds917salzburg-01

Holiday Buyer’s Guide 2013

bestbalsa-lola
Penske Sunoco Lola T70 MKIIIB Daytona 24Hrs 1969  Trans-kit

This amazing trans-kit for the 1/12 Tamiya Lola T-70 is available from Best Balsa Kits of Belgium. Our own David Sorensen has completed the project, which you can see on the website.

Where to buy: bestbalsakits.be 

tn_350 Ti59 tn_349
New Releases from Tameo

Tameo continues to produce fine collector kits and built-ups in 1/43 scale. The usual Ferrari offerings are available, in addition to many classic GP cars that are unique in this scale.

Where to buy: Icaro Hobbies

F1
Fujimi 1/24 McLaren F1 – Le Mans 1997

This new kit is a welcome addition to the 1/24 Sports Car world. So far Fujimi has released four versions of the long-tail car, and more are rumored to be coming in the near future. 

Where to buy: M&S Hobbies 

NewImage_6
Scale Motorsport Flying Lizard Decals

The Flying Lizard Porsches are fan favorites for their distinctive graphics. Now you can produce your own versions of the 2007 and 2011 Le Mans cars. 

Where to buy: Scale Motorsport

March-April 2013

IMG_1484-lg
NNL West 2013
Motor Racing
IMG_1766-lg
NNL West 2013
Hot Rods and More
IMG_1678-lg
NNL West 2013
GPMA Award Winner
IMG_1650-lg
Jagermeister Racing 
by Henry Trent
IMG_1409-lg
Canepa Motorsports
Showroom and Museum
gs02
Member Models
by Greg Sacho