Fujimi Ferrari 126C2 Long Beach 1982

1/24 Fujimi Ferrari 126 C2 F1, 1982 Long Beach GP Version

Kit No. 090337
Full Engine Detail
149 Parts

Overview

This is a new tool for Fujimi, which has not produced F1 kits in this scale the past. Apparently this is part of a new series of F1 kits, which will be a welcome addition to the market, since Tamiya has apparently stopped producing new F1 kits.

History

Many people seem to believe that this car never raced with its distinctive dual wing, or that it only ran the dual wing in practice, or that it never finished the race at Long Beach in 1982. None of these assertions is true. In fact, the car was always competitive during the race weekend, and Gilles Villeneuve drove it to 3rd place behind Niki Lauda’s McLaren and Keke Rosberg’s Williams. It was only after Tyrrell filed a protest that Villeneuve’s car was disqualified.

References

There are many good references available for this particular car. The following books provide plenty of photos of this car as it appeared at the 1982 Long Beach GP with the double wing arrangement:

Alan Henry, Ferrari: The Grand Prix Cars (Richmond, Surrey, UK: Hazelton Publishing, 1984 and Rev. 1989), p. 294.

Anthony Pritchard, Ferrari Turbos: The Grand Prix Cars 1981-1988 (Bourne End, Bucks, UK: Aston Publishing/Motorbooks International, 1989), p. 30. 

Ian Norris, Ed., Automobile Year No. 30: 1982/1983 (Lausanne, CH: Edita Lausanne), p. 91.

Ian Bamsey, Ed., Automobile Sport 82 83 (Somerset, UK: Superprofile/J.H. Haynes), p. 43.

The usual web image search should uncover some useful images if you don’t have the above books in your collection.

Hasegawa Ferrari 250 Testa Rossa

1/24 Hasegawa Ferrari 250 Testa Rossa

Kit No. HC-19

Full Engine Detail, 135 Parts

Overview

This is a brand new tool of a classic Ferrari. The first thing you notice upon opening the box are the many small parts that will go into this detailed model. Chassis frame rails, hood latches, bonnet, etc. All of these separate pieces would usually be part of a large chassis or body piece, but not in this case.

Molded in White, black, clear, and chrome, the castings are smooth and details are crisp.

History

The Testa Rossa is one of the most rare and sought-after racing Ferraris. This kit represents the cars that raced in 1958.

Several racing versions are possible with this kit. Decals are included for the following cars:

1958

No. 14, Sebring Winner, Phil Hill/Peter Collins
No. 14, Le Mans Winner, Phil Hill/Olivier Gendebien

No. 102, Targa Florio 3rd Place, Mike Hawthorn/Wolfgang Von Trips

No. 12, Nurburgring, 10th Place, Gottfried Kochert/Erik Bauer

I can understand the choice of No. 14, but the other two seem odd. Bauer tragically died from injuries sustained in an accident on the cool-off lap of the Nurburgring race.

Kit Review

Many details are faithfully represented in this version. One of the nicest details is the beautiful engine. The valve covers or Red Heads are nicely molded with full detail. There

The body is molded in white, which will make painting

References

A must-have reference for the Testa Rossa is Ferrari Testa Rossa V-12 bv Joel E. Finn. This book is available in paperback, and it’s not only a good reference with chassis numbers, race results, and period photos. It’s also a fascinating book in its own right. Enzo Ferrari, Phil Hill, Mike Hawthorn, Peter Collins, and many more great names are featured in this book.

 

Ferrari 250 TR Decal Set

Decal Set for 1/24 Hasegawa Ferrari 250 TestaRossa

DTR1 – Decals for blue #20 car of Picard & Juhan from LeMans 1958

(see below for placement sheet)

Price: $5.00

DTR2 – Decals for ENGLEBERT Tires

(see below for sample and placement sheet)

Price: $3.00

Please contact me at elruddick@cox.net if you are interested in purchasing these decals. Discount for quantities of 10 or more. Prices do NOT include postage and fees (if any).

 

March-April 2008


M&S Hobbies 
Toyota Eagle MkIII GTP


BHP Enterprises
Jaguar Trans-Am


NNL West 2008 Photos
(More details and photos coming soon)


GPMA Caps
Get yours today

M&S Hobbies Eagle MkIII GTP

M & S Hobbies announces the release of a new 1/24 scale kit of the 1993 Toyota Eagle MK III.

This resin and multimedia kit was designed and developed by M&S Hobbies with the full cooperation and support of Dan Gurney’s All American Racers and Toyota of North America.

This is the only 1/24 scale kit available of the 1993 Daytona winning car. The kit includes high-quality resin, metal, photoetch, and clear parts. Included are decals for both the 98 or 99 car and complete instructions.

Order yours now – we are sure the first production run will sell out fast.

Visit the M&S Hobbies Website to order.

BHP Jaguar Trans-Am

BHP Enterprises 2001 Jaguar Trans-Am
Trans-kit  for Revell Trans-Am Camaro
 
Paint:  Tamiya; Floquil; Cobra Colors
Body:  TS-44 Brilliant Blue, Cobra Colors Black, Floquil Crystal Coat
Build Time:  2 Weeks on and off

The BHP kit is a transkit, which includes resin, photoetch, vacformed windows, clear resin tail lights, template for rear wing uprights, and decals. 

The kit is pretty straightforward.  The kit directions are much better than the Mustang’s kit, but could still use some improvement.  An email address is included for any needed assistance, which is appreciated. 

The resin body had minimal flashing so it was very easy to clean. Some modification is needed on the body to fit the back wing.  Part fits were excellent.  The rims, which are nicely casted, are the same as the Mustang.  Decals are well done, but quite thin. 

I ended up tearing the jaguar on the side, so I was glad there was an extra set in the kit.  Setting solution should be used sparingly. The photoetch is well done, but there is a mistake on the wing uprights.  This error is noted in the directions.  There is a template to fix the angle.  The hood pins seemed to be too large, so I ended up using after market pins that I had on hand. 

I had a hard time finding reference photos on this car.  I could find every other Jaguar except this one.  I contacted BHP Enterprises.  They sent me to some sites which had some better pictures of the car.
 

For this being only the second kit for BHP Enterprises, the quality is on the level of some of the larger manufacturers.  I definitely recommend this kit.  It is nice to see a company doing cars of this era.  I hope they will do other versions of this car.  I’m looking forward to seeing what other kits they plan to do in the future.

On The Workbench – December 2007

Fast and Furious Nissan 350Z by Chris Hale

I got this in the monthly Club raffle and thought it would make an interesting race car. Not done yet . . .

Tic Tac Porsche 962 Reference Photos and Builds

We had a discussion of the Tic Tac 962. Philippe Moriniere provided this photo:

Harald Weber has built this nice version of the car.

Survey of Workbenches

Last month we had an interesting twist on the question “What’s on your workbench?” The answer came back as “Here’s what my workbench looks like.” The replies were very interesting, and they show how our members organize (or don’t organize) their workspaces.

Following are some examples of GPMA Members’ workbenches.

This is David Fredrickson’s work space, and I like the way it organizes lots of tools and supplies needed for modeling tasks.  

One consistent trend for most members is to keep spray painting work areas separate from other work areas. Here we see a nice home-made spray booth.

Ross Sharp gave us a good look at his latest projects, and we see he likes a large workspace.

Dan Hartz makes good use of a roll-top desk.

We can all relate to this storage option.

Jack Pearson incorporates his computer into his workspace.

Mike Hanson makes good use of the vertical space behind his workbench.

Chris Hale has a well-organized apartment space for his modeling projects.

Some may say it’s too clean, but David Sorensen’s workbench is ideal. Lots of room to spread out, and plenty of storage space.

Here is David’s spray booth.

Buddy Wolfe shows that he’s actually working on something . . .

Etienne Dhont wins the award for most “authentic” workspace. I love this shot.

Open Interface Tom's Lexus SC430

Tamiya Open Interface Tom’s Lexus SC430
Kit No. 24293
Model, text and photos by Dale W. King

This is the second in the series of Lexus 430 SCs that Tamiya has produced.

It’s built right out of the box and typical Tamiya quality. It had over 120 individual decals (the red is almost all decals